shrinkages
英
美
(shrinkage 的复数) n. 收缩, 收缩量, 减低
[化] 起皱; 收缩; 收缩量
shrinkage的复数
双语例句
- The full sintered Y-TZP had excellent mechanical properties, with bending strength of 710 MPa, fracture toughness of 4.77 MPa · m 1/ 2. During full sintering process, the shrinkages of dental crown in different spatial dimensions were equality and uniformity.
完全烧结的陶瓷材料机械性能优良，弯曲强度达到710MPa，断裂韧性达到4.77MPa·m1/2。在完全烧结过程中，各个方向收缩均匀一致。 - The shrinkages in water and dry of the complex polymer fibers are tested through a great deal of experiments. The shrinkage behaviours of the composite PBT/ PET fibers are analysed by means of linear regression method.
通过大量试验研究了复合聚酯纤维的沸水和干热收缩规律，并利用线性回归方法讨论了热收缩速率的变化规律。 - Testing method for drying and firing shrinkages of ceramic whiteware clays
陶瓷用粘土干燥收缩率和烧成收缩率测定方法 - On the one hand, casting shrinkages at different positions of the blade are considered as nonlinear thermo-mechanical casting deformations that are calculated with accuracy by finite element analysis.
一方面，基于叶片收缩变形位移场的有限元仿真结果，更为准确地计算铸件不同部位的收缩率； - During the solidification of ductile iron, the volume change can be separated into several stages: after molten iron poured, shrinkages occur along with the temperature descent;
球墨铸铁凝固过程中的体积变化可以分成如下几个阶段：浇注后，铁水随温度的下降，发生液态收缩； - Proceeded research to the workability, mechanical property and frost resistance of concrete using the method of orthogonal test, furthermore, carried on experiment for permeability resistance 、 wear-resisting property and drying shrinkages between fly ash concrete and only mixing admixtures concrete.
采用正交试验的方法对混凝土和易性、力学性能、抗冻性进行研究，并开展粉煤灰混凝土与只掺减水剂混凝土的抗渗性能、干缩性能、耐磨性能试验。 - The shrinkages of the different composition zinc matrix alloys were measured by the self made linear shrinkage measurer.
对模具用不同配比的锌基合金进行了收缩率的测定。 - The influences of initial temperatures and the sizes of clusters on the coalescence were revealed by calculating the shrinkages and aspect ratios and by tracking the snapshots of the system configures.
通过对并合体系的收缩因子、纵横比率计算，以及体系构型的跟踪记录，揭示了团簇的初始温度和团簇的尺寸对并合过程影响的一般规律。 - In order to ensure the forming accuracy of castings, it is necessary to consider the compensation for the shrinkages in the mould cavity for turbine blades brought by the solidification process.
为了保证精铸件的成形精度，制造所用的模具型腔必须对铸件的收缩变形进行补偿。 - When the magnesium alloys are welded by TIG or MIG, the metal in the seam will be oxidized acutely. Some defects such as cracks, voids and shrinkages appear.
当镁合金采用钨极氩弧焊、熔化极气体保护焊等焊接方法时，焊缝金属会剧烈氧化，产生气孔、裂纹等缺陷。